CDMICA ® Mica slip plane (in roll or sheet form) is a specially impregnated and pressed mica products which consist of phlogopite mica paper, glass fiber cloth, silicon resin and special layer like ceramic fabric or stainless steel. CDMICA ® Mica Slip Plane materials are primarily designed to separate refractory linings from the coil grout of coreless induction furnaces and offer the following benefits:

* Provides a vapor barrier against carbon gases

* Adjust the sintering depth and reduce the heat losese from the furnance

* Improve electrical insulation between the energized coil and the molten metal during sintering

* Optimize the heat flow to prevent over-sintering of the refractory lining,

* Prevents early leakage and subsequent costly damage to the coil,

* Facilitate the “removal” of worn crucibles/linings

* Protect the coil from mechanical stressses resluting from the expansion and movement of the crucible

CD-RMG: mica + glass fiber
CD-RMGM: mica + glass fiber + mica paper
CD-RGMG: glass fiber + mica + glass fiber

Thickness: 0.2/0.3/0.35/0.4/0.5/0.6/0.7/0.8mm

Width: 1m

Length: 20m/25m/50m/100m

CD-COMBI : mica + glass fiber + ceramic fiber

Thickness ：2.3/2.4/2.5 mm

Width： 1m

Length：20m/25m/50m/100m

CD-Combi prevents excessive heat loss

CD-304 mesh: mica + stainless steel mesh + mica

CDMICA flexible 304 mesh mica sheet is made of phlogopite mica paper with 304 stainless steel mesh inside as sandwiched between two layers of mica paper to sense and report worn out lining or metal run out, and early leakage of the molten metal through the refractory lining to an electronic control unit.

Thickness： 0.58~1 mm

Size: 980mm*600mm /980mm*1200mm

CD-304 tanged Sheet: mica + tanged stainless steel +mica

CDMICA flexible 304 plate mica sheet is made of phlogopite mica paper with 304 stainless steel tanged plate inside as sandwiched status between two layers of mica paper to sense and report worn out lining or metal run out, and early leakage of the molten metal through the refractory lining to an electronic control unit.

Thickness: 1~1.6 mm

Size: 1000mm*600mm /1000mm*1200mm